phone (503) 612-9860
fax (503) 692-3518
oersted@oersted.com
HOME : PRODUCTS : GAUSSMETERS : MODEL 460
Model 460 3-Channel Gaussmeter
Features
Measures DC or AC magnetic fields

Use for 3-axis measurements or as 3 independent gaussmeter channels

Displays measurements for all 3 channels simultaneously

Resolution to 5 ¾ digits (1 part in ±300,000)

DC accuracy is ±0.10% of reading

High-visibility vacuum-fluorescent display is easily read at a distance

Analog voltage outputs for each channel, RS232C serial port, and IEEE-488 port

Probes sold separately
show enlarged front and back panels
Show compatible gaussmeter probes
Price: $ 5,710
PRICES SUBJECT TO CHANGE WITHOUT NOTICE
Description
The Model 460 is a 3-channel, high-resolution gaussmeter, for use with single or multi-axis probes. It is capable of measuring magnetic fields from 0.001 Gauss to 300kGauss, with a DC accuracy +/- 0.10%. This unit is designed for demanding applications, such as material analysis and field mapping, where low-noise, high-resolution magnetic measurements are necessary. Measurements of AC and DC magnetic fields are shown in Gauss or Tesla on the two-line vacuum fluorescent display. The Model 460 features RS232C and IEEE-488 ports, allowing the instrument to be controlled via a remote computer or automation equipment. The Model 460 can be used with a 3-axis probe or with three separate single-axis probes, effectively providing three Model 450 gaussmeters in one instrument. Probes are sold separately, and are available in a wide range of constructions.
General Specifications
Measurement Ranges 300mG / 3 G / 30 G / 300 G / 3 kG / 30 kG / 300 kG
(range is dependent on probe type)
Resolution 0.001mG (when used with filter on and appropriate probe)
Accuracy, DC (displayed) ± 0.10% of reading; ± 0.005% of range
Accuracy, AC (displayed) ± 2% of reading, rms (50 Hz - 60 Hz)
Frequency Range 10 Hz - 400 Hz
Update Rate 4 readings / sec (display); up to 18 readings / sec on ports
Display Resolution ± 5 3/4 digits (max.)
Measurement Modes DC, RMS, Peak
Measurement Features Auto Range, Max Hold, Relative Mode, Filter,
Vector Magnitude, Differential Reading
Measurement Units Gauss or Tesla (with u, m, and k multipliers)
Probes Features Linearity correction, auto probe zero,
temperature correction
Types Multi-axis, axial, transverse, flexible transverse
Compatibility Standard and custom probes available
Connector 15-pin D-style
Front Panel Display Vacuum-Flourescent, high-visibiliy blue, 4 lines x 20 characters
Communication Ports RS232C (300 / 1200 / 9600 Baud)
IEEE-488 (complies with IEEE-488.2)
Alarms Settings High/low set point, inside/outside, audible
Actuators Display annunciator, beeper
Temperature Range 15 - 35° C (operating temp; 5 - 40° with reduced accuracy)
Input Power 100, 120, 220, 240 VAC 50/60Hz (select voltage when ordering)
Analog Outputs
Analog Outputs 1,2,3
(dedicated monitor outputs
for each channel)
Configuration Real-time analog output voltage
Output Voltage ± 3V = ± FS on selected range
Accuracy Probe dependent
Frequency Response DC to 400 Hz
Analog Output 4
(corrected output)
Configuration Output voltage from DAC
Output Voltage ± 3V (Model 460-10: ± 10V)
Accuracy ± 0.1% of FS
Update Rate (same as field measurement)
Connectors 4 x BNC jacks
Physical
Net Weight 16.5 lbs (7.5 kg)
Size (W x H x D) 17.1" x 3.5" x 14.5" (434mm x 89mm x 369mm)
Package Contents Gaussmeter, manual, zero-gauss chamber, line cord
(probes must be purchased separately)
Software Labview driver (available for download)
[home] [products] [services] [articles] [catalog] [request quote] [links] [email]
Copyright © 2003 Oersted Technology II Inc.